AGS-8/1
Fire Extinguishing Aerosol Generator AGS-8/1
Designed for generating gas-aerosol mixture at concentrations required to extinguish a fire.
Recommended to use fire-extinguishing systems for premises of average volumes.
-
The generator consists of a cylinder with a metal case, which is located at the end of the nozzle cover. The AGS-8/1 is almost identical to the AGS-7/1,but due to labyrinth cooling system, the aerosol and air begins to mix, which significantly reduces the temperature of the gas-aerosol spray.
Principle of operation:
By applying an electrical or thermal pulse on node startup, a solid aerosol charge is ignited. Products of combustion pass through the nozzle on the cover of the generator, and the aerosol enters the designated area.
Manufacturer’s warranty:
The manufacturer guarantees the generator to the technical requirements and Russian standards if the consumer follows the conditions specified in the instruction manual.
The warranty period for the generator – 18 months.
Exploitation period – 5 years.
Service period – 10 years.
-
Maximum protected volume conditionally sealed room
(d * <0,001 m-1)60m3 Curb weight of the generator 11.5 kg Weight of the aerosol charge 3.4 kg Working time 60 Dimensions Width 270 mm Length 222 mm Height 300 Activation starter BP-7.5-7.5 VRTH VEE, VELTH Resistance of the activation starter 7.5 ± 0.8 ohm 2.5 – 4 ohms Minimum start-up current 1А 0.4 А Starting voltage 12-24 1.5 – 24 The duration of the trigger pulse not less than 1.5 sec not less than 0.1 sec The inertia of the generator start <1.5 sec Operating Conditions Operating Temperature Range ± 50 °С. relative humidity at 25 ° C. 98% mechanical influences (in the frequency range up to 100 Hz) 0,5g Classes of fire-fighting 
-
-
